Roofing firm fined over safety breach

A roofing firm from Malton was fined today for safety breaches after a worker fractured his skull following a fall from height.

Mitchell Roofing Ltd, was contracted to replace existing rooflights at Monk Bridge Construction Co Ltd, Elvington, York. The injured worker slipped and fell some seven metres through the inner roof sheet sustaining severe injuries.

During its investigation, the Health and Safety Executive (HSE) l learned that there was no risk assessment in place for the job, and no precautions had been taken to prevent falls from the edge of the roof or through various fragile elements.

The defendant had previously clad a new building on the site without incident, using appropriate precautions, but the minor work of replacing the panels in an existing roof was not planned, and no precautions were followed.

Mitchell Roofing Ltd of Derwent Road, Malton was found guilty to breaching Sections 2(1) and 3(1) of the Health and Safety at Work etc Act 1974 and was fined £10,000 with £1,355 costs by York Magistrates Court.

After the hearing, HSE inspector Julian Franklin commented: “Basic precautions for roof work and better planning of the job should have been applied. Even short duration work on fragile roofs should be properly assessed and managed.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice, promoting training; new or revised regulations and codes of practice, and working with local authority partners by inspection, investigation and enforcement. 
  2. More about the legislation referred to in this case can be found at: www.legislation.gov.uk/
  3. HSE news releases are available at http://press.hse.gov.uk

Journalists should approach HSE press office with any queries on regional press releases.

Source link

LinkedIn
Twitter
Facebook
Pinterest
WhatsApp
Email
Latest Issue
Issue 324 : Jan 2025