Although the deadline for the UKCA certification process has been pushed to 30 June 2025, manufacturers of structural timber fasteners and fixings are being told to start now with getting products tested amidst a shortage of approved testing facilities in the UK. The advice, from Warringtonfire, a leading testing, inspection
Barings Real Estate, one of the world’s largest diversified real estate investment managers, and Industrious the highly regarded flexible workplace provider have announced that soaring demand for flex space in Manchester has resulted in the Industrious St Peter’s Square flex centre at Landmark Manchester being 86% occupied less than 18
As a long established and well-respected manufacturer of high-quality cast stone, Haddonstone has built strong relationship with the UK’s housebuilders; embracing both the large national and smaller regional developers, tailoring its operational structure over the years to ensure their needs are fully met. Already with over a quarter century of
The owners of one of the first Build-to-Rent (BTR) properties in Edinburgh is embarking on a major drive to improve energy performance across its flagship development as it looks to enhance its sustainability credentials while reducing energy bills for residents. Kingsford Group has secured a dedicated Energy Performance Certificate (EPC)
VinylPlus® launched its Progress Report 2023 at the 11th VinylPlus Sustainability Forum (VSF2023). Under the theme ‘Making the EU Green Deal Happen’, more than 160 delegates from 21 countries gathered in Florence, Italy, to debate sustainable solutions towards carbon neutrality, circularity in the building and construction sector, developments in green
Construction works are now underway at Taylor’s Bellfoundry in Loughborough to protect and enhance the Grade II* Listed Bellfoundry buildings and onsite museum, the last of their kind in Britain. Funded by The National Lottery Heritage Fund and Loughborough Town Deal alongside many others, the project is being led by
Although the deadline for the UKCA certification process has been pushed to 30 June 2025, manufacturers of structural timber fasteners and fixings are being told to start now with getting products tested amidst a shortage of approved testing facilities in the UK. The advice, from Warringtonfire, a leading testing, inspection and certification company, warns that manufacturers who opt to wait run the risk of finding themselves with nowhere to test their products, as there are only a handful of UKAS-accredited testing facilities in the UK. Accredited testing to enable UKCA marking can only be issued by an approved body listed on the UK government’s database. Under the UK Construction Products Regulation, from 30 June 2025, manufacturers of structural timber fasteners and fixings within the scope of the UK Designated Standard BS EN 14592 must successfully complete the testing process by a UK based laboratory for any product to be placed on the UK market. This also applies to any products undergoing a chance in specification. Ben Sharples, Commercial Lead at BM TRADA and sister company to Warringtonfire, said: “UKCA marking is very important for the construction industry, as it symbolises that the product being used conforms to the relevant standard and is a mark of integrity. It is very important that fasteners and fixings manufacturers do not get lulled into a false sense of security with this extended deadline on UKCA marking. “There are only a few UKAS-accredited bodies in the UK that are able to test fasteners and fixings, of which Warringtonfire is one of them, that will then allow you to go on and achieve UKCA certification. Manufacturers need to be aware that any products on the UK market after the June 2025 will need to have this testing completed. This goes for products undergoing a change in their specification too. For instance, fasteners and fixings that have a change in design or coatings, will also need to be re-tested to gain the UKCA marking and confirm their stated performance.” To help accommodate the rush for testing, Warringtonfire has launched its state-of-the-art Fastener Testing Laboratory, which is located in High Wycombe. The laboratory can undertake assessments of performance for structural timber fastener and fixing products, so that manufacturers can UKCA mark them to BS EN 14592. Accreditation for the laboratory was achieved thanks to the expertise of its technicians as well significant investment into high-calibre testing equipment. The facility includes a universal testing machine for compression and tensile testing, a series of bespoke testing rigs, and conditioning rooms for structural timber samples. The organisation will offer a range of geometric and mechanical testing procedures for dowel type fasteners from a particular group of structural timber fixings, comprising of nails, screws, staples, dowels and bolts. The laboratory can also test steel fixings used to create joints between timber components or to attach other materials to timber. UKCA certification became mandatory for all new construction products placed on the market in Great Britain as of 1 January 2021, as the UK transitions away from the EU-recognised CE Marking. The original cut-off date for UKCA marking for all applicable construction products placed on the GB market was 1 January 2023, before being pushed to the new date in 2025. “Although many manufacturers have successfully achieved UKCA certification, a sizeable number have not,” said Ben. “Lead times for testing are long, and laboratory availability is in short supply. The longer the delay in getting the process started, the more likely manufacturers are to be caught out, and this then affects them being able to sell or launch their new products. Our advice is to get in touch as soon as possible, to ensure a smooth transition and prevent any disappointment down the line.” To find out more about UKCA testing for structural timber fasteners and fixings, please visit: https://www.warringtonfire.com/testing-services/non-fire-testing/fastener-testing. Building, Design & Construction Magazine | The Choice of Industry Professionals
Barings Real Estate, one of the world’s largest diversified real estate investment managers, and Industrious the highly regarded flexible workplace provider have announced that soaring demand for flex space in Manchester has resulted in the Industrious St Peter’s Square flex centre at Landmark Manchester being 86% occupied less than 18 months after its launch. The 32,000 sq ft premium flexible workplace which is operated by Industrious is located across the ground, second and third floors of Barings’ award-winning 180,000 sq ft Landmark development at St Peter’s Square in Manchester City Centre. Since its launch, the space has attracted high profile occupiers including JPMorgan Chase & Co, HSBC, Nordcloud (part of IBM) and CMC to name a few, resulting in high occupancy levels. Ralph Dorey, Managing Director, UK at Industrious comments; “Flex space continues to be in strong demand and we’re finding that businesses have much clearer requirements for space and will come to us with exact desk needs and hours of meeting room space per month which is in contrast to previous years when there was more uncertainty. Many have a two year commitment with internal reviews after 12 months and we’re seeing demand polarised with most requirements for either 50-200 desks or at the smaller end of 2-10 desks. Regardless of the size though, it’s the perks that all the companies want in terms of the catering and hospitality offering, the events, the wellness programme and exercise facilities without having to compromise on a central location.” The benefits offered by the centre have proven so popular that the team has now launched a Community Membership scheme for occupiers on traditional leases in Landmark, which include; Vanguard, Starling Bank, Santander, Xero, RSM, Allianz Insurance, Grant Thornton and JLL, to benefit from the hospitality and wellbeing programme on offer as well as discounts on meeting rooms and conference facilities. Ian Mayhew, Managing Director, UK Asset management at Barings, said: “The flex centre has always supported Landmark’s traditional occupiers with overflow meeting and coworking space, and the ability to expand into flexible private offices as needed. However, the new community membership initiative allows them to benefit from daily breakfast, coffee, tea and snacks, and a weekly calendar of virtual and in-person programming and events, which can be invaluable in the attraction and retention of staff. One of our new occupiers, Santander who have signed a lease for 11 years, is moving to Landmark from another Industrious centre and we know that the community membership offered by Industrious was an important factor in their decision making. It’s also a good example of how the partnership between Barings and Industrious is operating for the benefit of the building as a whole.” The flex market hasn’t reached saturation according to Dorey. “We’re actively looking for new locations for our flex centres. If you have the right building with the ability to deliver the best set up then the demand will be there. As a premium provider of space, one of the key factors for us has always been the detail on aspects such as sound attenuation. This has been critical for organisations such as HSBC UK who require that level of privacy. We have a formula that works and are looking into more partnership agreements to continue to roll out the centres.” Industrious operates four locations across the U.K. The centre at Landmark offers 23 private offices accommodating one – 300+ people (Industrious Team), multiple conference rooms with state-of-the-art technology to accommodate in-person and hybrid work (Industrious Meet), and coworking spaces for individual workers (Industrious Share). Private offices come with an array of branding options for occupiers, enterprise-grade technology and customisable layouts. The space also features a cafe, multiple lounge and seating areas perfectly suited for group meetings and collaboration. In a commitment to providing an engaging workplace experience, in addition to the hospitality and wellbeing programme, members can expect high-speed and secure Wi-Fi, mailing and printing capabilities, on-site support from a dedicated Community Manager, access to a global network of workspace and more. Completed in 2020, the 180,000 sq ft award-winning Landmark development offers 14 floors of BREEAM Excellent and Wired Score Platinum certified, office space in Manchester City Centre. Barings’ focus on well-being, customer experience, sustainability and technological infrastructure at Landmark has delivered a world-class office building with the capacity to support the implementation of Hana by Industrious’ high-quality and hospitality-driven operations. Landmark also provides all-important facilities for existing and future tenants, including the introduction of contactless technologies enabling touch-free movement within the building, access to secured bike spaces, an eleventh-floor terrace, a fully equipped locker room with showers, electric car charging stations and more. Leasing agents on Landmark are CBRE, Colliers and JLL. For more information, please visit www.industriousoffice.com or www.landmarkmanchester.co.uk. Building, Design & Construction Magazine | The Choice of Industry Professionals
As a long established and well-respected manufacturer of high-quality cast stone, Haddonstone has built strong relationship with the UK’s housebuilders; embracing both the large national and smaller regional developers, tailoring its operational structure over the years to ensure their needs are fully met. Already with over a quarter century of experience at the family run firm, Toby Marlow is the Director leading Haddonstone’s Building and Construction team. He is engaged on a day-to-day basis with ensuring client architectural projects are run and completed to achieve best possible outcomes. Callum Jensen fills the complementary role of Export and Business Development Manager, overseeing all the company’s sales and other activities outside the UK. Also, over the past decade at Haddonstone, Callum has further worked in business development, technical support and as a key accounts manager: affording the pair a full understanding of sales, production and client services. As a founding member of the UK Cast Stone Association, Haddonstone has always invested to ensure its diverse range of standard products, as well as its continuous output of bespoke items, are manufactured to exceed industry standards, whilst also respecting the environment. In fact, over 80% of the Building and Construction team’s components are produced to meet their clients’ precise requirements: involving the unique skillset of the craftsmen in Haddonstone’s moulds workshop, constant monitoring of the mixes which fill them, and rigorous testing of the finished products. The latter includes water absorption rate, compressive strength and pull-out strength, as well as visual inspections and regular independent testing. Toby Marlow commented: “Here at Haddonstone we are fully committed to meeting our customers’ needs, whether they relate to a major new housing development, a one-off Georgian style property, or the repair and restoration of a listed period property. We can offer site surveys where required, supply of very detailed CAD drawings or building elevations, guidance on installation and after sales service – to ensure quality and durability are achieved every time. We have our own transport fleet, can recommend experienced installation specialists local to projects and will always work with our clients to resolve their issues.” For more information on Haddonstone’s products and services, including from the Building and Construction team, please visit https://www.haddonstone.com/en-gb/building-and-construction/ For further information, call 01604 770711 or visit www.haddonstone.com Building, Design & Construction Magazine | The Choice of Industry Professionals
The owners of one of the first Build-to-Rent (BTR) properties in Edinburgh is embarking on a major drive to improve energy performance across its flagship development as it looks to enhance its sustainability credentials while reducing energy bills for residents. Kingsford Group has secured a dedicated Energy Performance Certificate (EPC) Improvement Loan from Secure Trust Bank (STB) Real Estate Finance to achieve a minimum EPC rating of C across a number of luxury apartments at its historic Kingsford Residence. The Edwardian building, which was converted into 74 luxury apartments in 2017, boasts a gym, roof garden and co-working business space. Following the sharp rise in energy costs and a desire to protect residents, Kingsford Group commissioned an EPC assessment to establish the measures that would need to be introduced in order to raise energy performance of the building. The EPC Improvement Loan from Secure Trust Bank will fund the installation of secondary glazing in collaboration with Perth-based Glaze & Save, specialists in bespoke magnetic secondary glazing for listed buildings. Once upgraded to an EPC C-rating, further measures will be introduced such as solar panels, community battery and heat pump technology. The partnership between STB and Kingsford Estates dates back to 2018, with STB Head of Origination, Matthew-Blaine Young and Kingsford Group’s CEO, Alex Watts agreeing the 12-month EPC loan off the back of a strong working relationship. A testament to the like-mindedness of the pair, the deal took just two weeks to complete, with the wheels already in motion on retrofitting the upgrades to the property. Alex Watts, CEO of Kingsford Group, said: “The loan we’ve agreed from Secure Trust Bank is essential to our ambitions to transform the energy performance of The Kingsford Residence towards fully renewable net-zero operation. As a landlord you have the ability to make a difference. Fundamentally, our team and clients care about the future of the planet and this means exceeding minimum standards wherever possible. “Matthew at Secure Trust Bank understood my desire to make the right decisions for people and the planet, which is why there was no doubt in my mind that the EPC Improvement Loan was the best option. Not only do we want to continue leading the way in the Scottish BTR market, we want to do it in an environmentally positive way – changing the industry through changing opinions on the value of eco-friendly development.” Secure Trust Bank’s EPC Improvement Loan, which is available to the bank’s existing customers, is designed to help residential landlords remediate their property portfolios with energy-saving solutions. The new product is an extension (top-up) to existing loans, providing fixed sums of £6,500 and £13,000 for EPC D and EPC E-rated assets respectively. Matthew-Blaine Young, Head of Origination at Secure Trust Bank Real Estate Finance, added: “Given anticipated regulatory changes and pressure on residents’ living costs, we want to help landlords prepare and overcome associated challenges. Our commitment to environmental responsibility is why we were one of the first banks to offer an EPC-specific product, and Alex epitomises the kind of property developer we love to work with in every way.” Building, Design & Construction Magazine | The Choice of Industry Professionals
VinylPlus® launched its Progress Report 2023 at the 11th VinylPlus Sustainability Forum (VSF2023). Under the theme ‘Making the EU Green Deal Happen’, more than 160 delegates from 21 countries gathered in Florence, Italy, to debate sustainable solutions towards carbon neutrality, circularity in the building and construction sector, developments in green procurement and sustainable product certifications. Two years after the launch of its VinylPlus 2030 Commitment, the European PVC industry convened in Florence, Italy, on 11 May 2023. Stakeholders debated progress in sustainability and the circular economy and how to put in place concrete actions to make the EU Green Deal happen. Opening the VSF2023, Karl-Martin Schellerer, Chairman of VinylPlus, highlighted the main progress and achievements of the European PVC industry in 2022, which are summarised in the VinylPlus Progress Report 2023. 2022 – A year with major milestones towards the 2030 sustainability commitment In terms of circularity, 813,266 tonnes of PVC waste were recycled within the VinylPlus framework in 2022, representing around 27% of the total PVC waste generated during the year in the EU-27, Norway, Switzerland and the UK. Since 2000, 8.1 million tonnes of PVC have been recycled and reused in new products, preventing the release of 16.2 million tonnes of CO2 into the atmosphere. Heavy investments have been made in research and development projects aimed at removing legacy additives from waste and increasing chemical recycling of PVC waste that cannot be mechanically recycled in an eco-efficient manner. As we tackle legacy additives, the industry is also looking to future-proof additives used today: a key tool to achieve this is the Additive Sustainability Footprint® methodology, which enables companies to proactively assess and promote the sustainable production and use of PVC additives throughout the entire product lifecycles. The methodology was shared with European PVC converters and presented at several events in Europe and abroad. VinylPlus’ vision is to broaden the use of the Additive Sustainability Footprint®. Throughout 2022, VinylPlus also launched a series of initiatives aimed at supporting member companies’ efforts in reducing water and energy consumption, increasing the use of renewable energy and raw material, and minimising any accidental spillage of PVC into water and the environment. The VinylPlus® Product Label, the sustainability certification for PVC products for the Building and Construction sector, was updated and included in the Italian GPP CAM (minimum environmental criteria). The Label’s criteria are currently under assessment by the Swiss organisation Ecobau. In addition, the first five companies have obtained the VinylPlus® Supplier Certificates, the sustainability certifications for additives suppliers and compounders. Regulator and industry representatives exchange on state-of-play and future of PVC Moderated by EurActiv’s Senior Editor Frédéric Simon, the first session of the VSF2023 focused on the upcoming European policy initiatives on plastics and PVC and the regulatory challenges of the EU legislative framework. Significant contributions to the debate, and inspiring perspectives, were provided by Francesco Virtuani, Circular Economy and Sustainable Development Division of the Ministry of Enterprises and Made in Italy; Paola Migliorini, Deputy Head of Unit, European Commission DG ENV; and Simone Doyle, Head of Risk Management Unit at the European Chemicals Agency (ECHA). “The European Chemicals Agency’s objective – observed Simone Doyle – is to implement legislation to ensure the protection of human health and the environment and we look at chemicals more holistically, across lifecycles in a less fragmented way, also considering sustainability. The current investigation work on PVC and PVC additives, requested of ECHA by the EU Commission, gives us the opportunity to develop a framework to compare circular economy aspects of PVC and alternatives and their wider environmental impacts throughout the lifecycle. We hope this approach for PVC can be used in other impact assessments in the future.” “VinylPlus is fully committed to supporting a rigorous, comprehensive, and science-based investigation process – commented Brigitte Dero, Managing Director of VinylPlus – to ensure the European PVC value chain a fair transition to a sustainable future. Our Forum 2023 shows that the European PVC industry can work jointly with policymakers and industry partners to address sustainability challenges. The recent publication of the REACH restriction on lead in PVC, for example, is the result of fruitful discussions between regulators, industry, and other stakeholders and builds upon the industry’s efforts to reduce the use of hazardous substances in PVC products and further enhance the circularity of the PVC industry. This regulatory measure will restrict the import of lead-containing PVC products from third countries where lead is still used as a stabiliser and will enable the PVC industry to meet its ambitious recycling targets in a way that is safe for human health and the environment.” The event’s second session focused on accelerating circularity in building and construction. Discussions revolved around the Construction Product Regulation, currently under revision, and to the implementation of the Eco-Design for Sustainable Products Regulation, as well as architects’ and industry’s perspectives on how circularity in construction can be achieved. In the last session of the Forum, speakers analysed the path towards sustainable development through certified and traceable products and the future of Green Public Procurement (GPP) in Europe. The contribution to more sustainable products for GPP provided by the VinylPlus® Product Label for PVC converters and the VinylPlus® Supplier Certificates for PVC additives suppliers and compounders is increasingly recognised by stakeholders. An award ceremony was dedicated to the companies that were certified in 2022: Akdeniz Chemson, Baerlocher, IKA, Polymer-Chemie, Reagens, Salamander and Sattler. Closing the Forum, Karl-Martin Schellerer remarked: “I am very proud to announce that the PVC industry is on track to deliver the first targets of VinylPlus 2030. We are continuously working to improve our sustainability performance. Still, a clear and supportive regulatory framework is essential to set even more ambitious targets and continue to play a significant role in enabling the EU Green Deal. To this end, we are ready to work collaboratively and constructively with regulators in line with a science- and evidence-based approach. I am sure that the enthusiasm and the engagement of our partners seen during the VSF2023 will
Construction works are now underway at Taylor’s Bellfoundry in Loughborough to protect and enhance the Grade II* Listed Bellfoundry buildings and onsite museum, the last of their kind in Britain. Funded by The National Lottery Heritage Fund and Loughborough Town Deal alongside many others, the project is being led by the Loughborough Bellfoundry Trust working in partnership with the ancient bellfounding firm of John Taylor and Company. The Trust was set up in 2016 to begin the work of restoring the bellfoundry’s buildings and redeveloping the site’s museum to protect the ancient craft of bellmaking for generations to come. Taylor’s Bellfoundry – which was built in 1859 just a stone’s throw from Loughborough town centre – has cast more than 25,000 bells located in more than 100 countries. Bells from the foundry hang in famous landmarks including London’s St Paul’s Cathedral, the Washington National Cathedral in the US capital, Australia’s National Carillon in Canberra, and South Africa’s Cape Town City Hall. In spring 2022 contractors were invited to tender to deliver the programme of works, with specialist heritage conservation firm Messenger BCR winning out. The Messenger team will work alongside internationally renowned architects Caroe, who drew up comprehensive plans to restore the Victorian site. Other specialist practices involved include exhibition designers Redman Design and museum retail experts cre8. Phase one of the programme of works is now underway. This includes the stripping out of the existing museum, removing internal walls – which were added to the bellfoundry in the 80s – and replacing the leaking roof. A new lift is currently under construction as are new disabled and baby changing toilets. Major repairs to the roof over the bellfoundry’s main covered yard are also underway. The museum will be improved and enhanced by increasing its footprint to incorporate a multi-function activity room in the old Victorian laboratory and by reimagining the museum displays to provide an interactive and inclusive experience. There will be two primary spaces for visitors to explore within the museum. Firstly, a ground floor timeline detailing the history of both the bellfoundry and the art of bellfounding. Secondly, the Patternmaker’s Gallery, which will display a series of objects that have been recovered from existing foundry spaces, located in the original patternmaking workshop. Throughout the museum visitors will have the opportunity to touch and handle objects, making it an immersive and authentic experience for families, schools, bell enthusiasts and history lovers. Phase two of the project, which will start in 2024, will see the reconfiguration and improvement of the company archive room, offices, and board room, the last of which will be available to hire as a meeting space for outside organisations and community groups. Further ongoing and exciting developments include the restoration of the original historic entrance to the site, used by generations of the Taylor family, and the relandscaping of the Carillon Courtyard for visitors to explore and enjoy the grounds upon arrival. Bellfoundry museum director Dr Chrissie Van Mierlo said: “We are thrilled to see work getting underway. This project has been years in the making and will help preserve and protect our historic buildings for generations to come. “Our vision has always been to create a place where people of all ages can visit and learn about the craftmanship and art of bell making, as well as the history of the Loughborough site. Thanks to generous funders, and National Lottery players, we can now address the most urgent repair and conservation works to bring our vision to life. “Not only will the project allow us to welcome more visitors into the site, but it will also create additional volunteering opportunities for local residents. Our volunteers are the life and soul of the bellfoundry and we wouldn’t be able to do what we do without them.” Robyn Llewellyn, director for England, Midlands and East at The National Lottery Heritage Fund said: “We are delighted to support The Loughborough Bellfoundry Trust in saving the last, purpose-built bellfoundry in Britain. The funding, which has been made possible thanks to National Lottery players, will secure the future of this industry, unique skills, and rich history in a way that everyone can enjoy and be proud of.” Loughborough Town Deal comprises a number of organisations and people who have come together to deliver over £40 million of investment for the Leicestershire town. The Town Deal secured £16.9 million from the Government’s Towns Fund to boost skills and support the visitor economy and town centre of Loughborough. It is backing 11 projects, including the bellfoundry which it awarded £835,000. John Taylor’s Bellfoundry, also known as Taylor’s Bellfoundry or simply Taylor’s, is the last major bellfoundry in the UK and Commonwealth. Building, Design & Construction Magazine | The Choice of Industry Professionals
