BDC

Search
BDC Magazine

heating

The future of heating our homes

Time is running out for the UK to meet its carbon reduction targets and the way we live has to change. A big part of that will be saying goodbye to our gas and oil boilers, which the UK is looking to phase out almost completely by 2050. Indeed, in

Read More »

Effective Heating Solutions for Restaurants from Tansun

Tansun, the infrared heating manufacturer and expert, has pioneered infrared heaters capable of completely heating an outdoor area, encouraging diners to eat outside all year round. This range is designed to enable outdoor areas to become an extension of an indoor area and consequently provides extra revenue for the bar

Read More »

Latest Issue

BDC 319 : Aug 2024

heating

The future of heating our homes

Time is running out for the UK to meet its carbon reduction targets and the way we live has to change. A big part of that will be saying goodbye to our gas and oil boilers, which the UK is looking to phase out almost completely by 2050. Indeed, in March 2019 it was confirmed that from 2025 it will be illegal to install gas boilers in new build homes. It’s a tall order, especially when you consider that the Department of Business, Energy and Industrial Strategy (BEIS) has vowed to try and keep energy bills as low as possible. The Guardian reported in 2018 that households need electric or hydrogen boilers sooner rather than later if the UK is to hit its carbon targets at the lowest cost. And while electricity supplies are rapidly switching to low-carbon sources, almost all homes today rely on fossil fuels. According to the Committee on Climate Change (CCC), the public is largely unaware of the alternatives, and consumer understanding is “far from where it needs to be.” So, we need to make big, long term changes to the way we power and heat our homes, but with minimal up-front costs and lower ongoing energy bills. Building Products caught up with IOBAC’s CEO Paul Woolvine about how the built environment could do it. IOBAC delivers innovative heating and flooring technologies based around speed of install, flexibility, operational effectiveness, and sustainability. Heated flooring to the rescue (but not as you know it!) Generally, underfloor heating operates at a lower temperature when compared with standard radiators; it retains heat for a good length of time after it has been switched off; and the even distribution of heat can allow a room to heat up more quickly and stay warm. For some people, however, barriers still exist that put them off underfloor heating. It’s considered by many as an expensive luxury product with a disruptive, complex installation processes. It can also be difficult to remediate if there’s a problem. And the big one: typically, there are limited options for renewable energy inputs.  So, can we harness all of the intrinsic benefits of underfloor heating within a simpler, more cost-effective and accessible solution? The good news, according to IOBAC’s CEO, Paul Woolvine, is “yes”. Paul explains: “IOBAC heated flooring was developed to overcome issues commonly associated with conventional electric mats and water-based underfloor heating systems. Our heated flooring solution doesn’t require you to dig up your floor or cause any disruption to any existing pipework or electric system.” Sounds easy, right? “It really is as easy as it sounds,” continues Paul. “The process is as follows: lay conductive copper strips, apply conductive paint, apply magnetically dielectric paint, install surface tiles, connect copper strips, and away you go. It’s far easier to install and much easier to remediate or change and is a simple painted solution – simply remove the floor tile and coating and repaint. And importantly, this underfloor heating solution can be powered by a highly efficient electric input from an AC or DC supply – like solar panels. With this technology it’s absolutely feasible to heat your home with solar power – or any other electrical input for that matter. That way people don’t need to be reliant on big energy companies.” On this solution’s sustainability credentials, Paul explained: “Well, firstly, this solution uses infrared heat. Research suggests that infrared heat has numerous health benefits, including increased blood circulation, an enhanced immune system, and reduction of joint pain and inflammation. Infrared heat is typically more budget friendly; designed with sustainable inputs the running costs are significantly less than conventional solutions and the temperature tends to be more consistent.” So, you’ve heard of heated flooring, but heated walls? Traditional radiators can range anywhere from 120mm to 480mm and typically, the thicker the better due to a lower fin density. But a thicker radiator can look bulky and unsightly, or even cause design issues. Paul explains why he believes IOBAC’s alternative offers the best of both worlds: “Our heated walling technology is a modern-day alternative to traditional radiators. It’s a micro-thin radiator which can essentially be ‘painted’ onto the wall using a special patent-pending Graphene based technology. This enables more design freedom – no more unattractive wall-hung radiators – and can be connected via an AC or DC supply. Imagine your home without bulky radiators! This technology essentially works in the same way as our heated flooring: conductive copper strips, apply conductive resin, dielectric paint, and connect copper strips. It shares further similarities with heated flooring: it’s non-disruptive, cost-effective, and enjoys all the benefits of infrared heat. “Of course, some people – especially those that are environmentally conscious – may want to switch out their traditional radiators straight away. But we don’t necessarily anticipate 20 million-plus households to rip out their existing radiators overnight. It’s why, initially, we envisage that this technology will be best suited to the new-build market. It’s also why we’ve developed a smart radiator cover for retrofit applications that will be available later this year.” Retrofit radiators do of course currently exist, but some can be inefficient and fairly expensive. Paul explains IOBAC’s imminent answer: “Retrofitting radiators can be costly and time-consuming – often you have to deconstruct the radiator. IOBAC’s technology enables you to effectively cover the existing radiator with a highly efficient Graphene based heating system, which is really simple to do yourself. This is again utilising our super conductive graphene technology and, as with our heated flooring and heated wall technology, it can be designed to be more efficient than traditional solutions. This will be available to buy over the counter later this year. Watch this space!” Straightforward switching Paul concludes: “We think these technologies could enable the government’s 2050 target to potentially become a reality by the mid-2020s. But, crucially, it needs to be straightforward for people to switch to more sustainable solutions and energy sources. As The Guardian says, most people, unfortunately, are unaware of the alternatives. More

Read More »

Underfloor heating a commercially viable alternative to radiators a new study finds

A new study into the installation costs of underfloor heating versus traditional radiators has shown that the underfloor heating option is far more economical than is generally perceived. The study, conducted by force drying specialist, ForceDry, was based on data from leading contractors for installations in a one, two and three bedroom property. Three specifications were included: traditional radiators and 75mm sand & cement screed, traditional radiators with a 50mm flowing screed, and a 50mm flowing screed with underfloor heating. The findings showed that, for an 80m2 dwelling, installation costs for the sand and cement approach range from £3,003.72 to £3,483.10; for a 50mm flowing screed  with radiators costs start at £3,163.72 to £3,563.10 and for a 50mm flowing screed with underfloor heating costs range from £3,464.63 and £4,082.30.  The costs for the underfloor heating approach also includes force drying, which facilitates fast, safe drying of liquid screed floors. This approach reduces drying time typically from around 90 days to as little as 28 days, representing a significant time saving and additional cost saving in the construction process. Ross Verity, managing director of ForceDry, said:  “There is a perception that underfloor heating is expensive and only practical in commercial terms for installation in higher end properties. However, our study shows that the underfloor heating method is only marginally more expensive to install than radiators, but when combined with force drying with the considerable cost benefits of the time saved  factored in, the overall costs could actually be less. This means underfloor heating with a flowing screed can be a viable solution for all kinds of housing, including social and affordable.” Verity also points to the environmental benefits of using liquid gypsum screed flooring, which comprise 98% recycled waste material, require less energy to produce and, because it is thinner, uses less material.  These factors result in a carbon footprint over 70% lower than that of sand and cement screeds. Verity said:  “This approach is economical to install, environmentally friendly and performs very efficiently. It can save developers and property owners time and money during build and allows them to offer a superior product specification. Home owners and tenants then benefit from the comfort, economy and low maintenance this kind of system offers.”

Read More »

Effective Heating Solutions for Restaurants from Tansun

Tansun, the infrared heating manufacturer and expert, has pioneered infrared heaters capable of completely heating an outdoor area, encouraging diners to eat outside all year round. This range is designed to enable outdoor areas to become an extension of an indoor area and consequently provides extra revenue for the bar or restaurant. When an outdoor area is equipped with adequate heat coverage, customers prefer to sit outdoors, found Tansun. However, more than 90% of outside areas are not being heated effectively, resulting in areas now only being unused, but also a wasted investment for bars and restaurants. The Merchant House or the ‘Museum Brasserie’ in Jersey installed Tansun’s Sorrento heaters on its terrace to create a better and more profitable outdoor dining experience. Installing a more effective heating solution resulted in the restaurant receiving more bookings and seeing a noticeable increase in its sales. “With a large outside space and with British weather being as it is, it was clear to us that adequate heating was crucial to our business model. While they added a certain ambiance with the flames, the gas heaters we were using were ineffective, unreliable, expensive to run and bad for the environment. Having looked across the market at both local and international suppliers, the sleek look, anti-glare properties, range of products from Tansun and the reasonable prices seemed like the obvious option for us,” said Alex Dolan, Business Development Manager, Dolan Hotels Jersey. “We saw Tansun at the Restaurant Technology and Restaurant Design Expo in ExCel London, liked their products and chose to install six Sorrento heaters. We are so pleased that we will definitely be choosing them when we eventually refurbish our other restaurants. Our clients regularly comment on how they like the new found warmth of our terrace and this can be seen in the sales. As a matter of fact I posted a picture on Facebook and got a call for a table of eight under the heaters five minutes later,” Alex added. Tansun’s range includes a selection of energy-saving switches and heater controls designed to suit almost any situation or need. All of its products are made in the UK and are designed using premium components. The company has been established for 35 years and pioneered the concept of infrared electric heaters alongside Philips technology.

Read More »