Trades & Services : Fire Prevention News
Lime Street Wall Cavity Wall Insulation, Dublin South Docklands

Lime Street Wall Cavity Wall Insulation, Dublin South Docklands

This development located in the popular Dublin docklands features 216 one and two bedroom apartments over six floors. Designed in a u-shape block with central courtyard and internal atrium where the FIRETITE was installed. FIRETITE was installed along the main masonry wall between the basement and ground floor. The cavity

Read More »
Hochiki Europe supporting the next generation of life safety engineers

Hochiki Europe supporting the next generation of life safety engineers

Leading manufacturer of life safety products Hochiki Europe, have today demonstrated their commitment to training for life for fire engineers and apprentices with a sizeable donation of life safety equipment to Banham Academy’s new training facility in Derby. Banham Academy are the leading specialist training provider in England delivering the

Read More »
Setting the highest fire door standards

Setting the highest fire door standards

Fire doors are a vital component of any fire safety strategy – but does current UK regulation go far enough? Ruth Deardon, Product Line Manager at JELD-WEN looks at what can be done to ensure fire doors perform as needed. The critical importance of fire doors has been recognised throughout

Read More »
IMA’s Seven Steps to Fire Safety Online CPD Now Available

IMA’s Seven Steps to Fire Safety Online CPD Now Available

Insulation Manufacturers Association (IMA) has created an online CPD – Seven Steps to FireSafety – focusing on the context of fire in relation to the built environment and the priorities for fire safety. Aimed at anyone interested in the design, construction and operation of buildings the CPD outlines the seven

Read More »
Partel’s Evolving Range of Fire Performance Construction Membranes

Partel’s Evolving Range of Fire Performance Construction Membranes

Partel, a leading manufacturer of air and wind tight membranes, has combined a decade of industry experience and technical knowledge to develop two new fire-rated breather membranes EXOPERM DURO A1 and EXOPERM MONO DURO A2, that surpass current fire safety regulation levels for high-rise and high-risk buildings. These high-performance membranes

Read More »
srththdfghdfg

The significance of fire doors to a building’s fire safety

The Grenfell Tower Inquiry (Phase 1) identified numerous failings including compromised escape routes and fire doors that did not, through damage and/or disrepair, act in the way that they should to prevent smoke and gases from spreading. As such, the Inquiry recommended (Recommendations 33.29 (a) and (b)) that the owner

Read More »
OFR Consultants Kicks Off 2023 With A Host Of New Projects

OFR Consultants Kicks Off 2023 With A Host Of New Projects 

Leading fire engineering consultancy OFR Consultants, has been appointed on several high-profile projects throughout the UK, supporting clients in the custodial, aviation and healthcare sectors. Among the new projects is a body of work with the Ministry of Justice (MoJ), with OFR appointed to work on fire engineering strategies for

Read More »
Construction workers unite to improve fire safety

Construction workers unite to improve fire safety

The Construction Industry Training Board (CITB) is calling on all construction workers to help improve fire safety across the industry. Following the Grenfell Tower tragedy in 2017 and subsequent inquiry, the industry has worked hard to increase safety standards to prevent such an incident from happening again. One outcome has

Read More »
Latest Issue
Issue 330 : Jul 2025

Trades : Fire Prevention News

Lime Street Wall Cavity Wall Insulation, Dublin South Docklands

Lime Street Wall Cavity Wall Insulation, Dublin South Docklands

This development located in the popular Dublin docklands features 216 one and two bedroom apartments over six floors. Designed in a u-shape block with central courtyard and internal atrium where the FIRETITE was installed. FIRETITE was installed along the main masonry wall between the basement and ground floor. The cavity varied in thickness between 50 to 70mm, making it ideal for the installation of our innovative FIRETITE cavity wall insulation. FIRETITE is the world’s first three-component mineral based insulation developed by BASF. It is fire classification of A2-s1, d0, a thermal conductivity of 0.034W/mK, contains no harmful pollutants, has no internal propellants and has achieved the best EMICODE emissions classification of EC1 plus. FIRETITE was installed at this development by our registered contractor, Adrian McGirr and his team from Fior Insulation & Fire Protection. Fior are experienced passive fire protection specialists and are involved with FIRETITE because they recognised the benefits and potential for this unique product. “It’s exciting to be involved with FIRETITE as a new innovative solution for fire rated cavity wall insulation. This product can help rectify many of the cavity wall fire challenges we have faced over the last few years”, said Adrian McGirr, Fior Insulation. Project: A residential scheme featuring 216 apartments with private balconies or terraces situated in the heart of the Dublin docks.Developer: Marlet Property GroupMain Contractor: BAM IrelandArchitect: Henry J. LyonsFIRETITE Installer: Fior Insulation & Fire protection LtdScope of Project: Install FIRETITE in specific brick cavity along the atrium wall at ground floor and basementProducts used: FIRETITE Class A2, S1, d0 mineral based cavity wall insulation

Read More »
Hochiki Europe supporting the next generation of life safety engineers

Hochiki Europe supporting the next generation of life safety engineers

Leading manufacturer of life safety products Hochiki Europe, have today demonstrated their commitment to training for life for fire engineers and apprentices with a sizeable donation of life safety equipment to Banham Academy’s new training facility in Derby. Banham Academy are the leading specialist training provider in England delivering the Level 3 Fire Emergency and Security Systems (FESS) apprenticeship to apprentices across the country. Graduates leave the Academy with vital skills and accreditations, enabling them to embark on fruitful careers within the fire and security industries. Apprentices are released from their employer to train at Banham Academy’s educational training centre for 15 weeks, over a three-year period, undertaking a combination of coursework and practical training. Successful completion of the course sees an apprentice awarded with qualifications and invaluable credentials for their careers ahead. Furthermore, as Banham is the first IET-approved centre, employers gain a competitive edge as graduates are officially recognised and accredited by the IET as engineering technicians. Hochiki Europe have donated a range of life safety devices to Banham Academy’s newly opened Derby training centre including addressable panels, smoke and heat detectors, sounder bases and beacons, relay units, call points and remote indicators. Kevin Faulkner, Operations Director, Banham Academy, explained “We are grateful to Hochiki Europe for their donation of life saving equipment to our second training site in Derby. Banham Academy are reliant on donations from manufacturers within our industry to allow our apprentices to continue their training on industry-leading products that are trusted and are of the highest quality. Competency of installing, commissioning, and maintaining leading security and fire systems is an important part of the learning that we provide at the Academy. This vital hands-on learning allows our graduates to leave being proficient in handling lifesaving products and systems with the utmost of knowledge and care.”  The Derby facility is Banham’s second Academy, allowing them to deliver their apprenticeships to even more young people across the UK from both their London and Derby sites.  Not only is the training centre bigger, but crucially the location will make it more accessible for students based in the North. Nathan Hudson, Sales and Marketing Director at Hochiki Europe said “We were delighted to help Banham Academy because we know how important it is to encourage and support career development as well as helping the next generation of life safety engineers across the country. Compliance is crucial in our world, we design and manufacture products which are trusted to not only save lives and property, but also reduce false alarms, but this is only possible when the installation is compliant. Our aim with this donation is to enable Banham Academy to deliver hands on, compliant training using the latest life safety technology”. To date Banham Academy Derby has 125 students currently enrolled, but by the end of the year they are expecting that number to rise to 200. Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
Setting the highest fire door standards

Setting the highest fire door standards

Fire doors are a vital component of any fire safety strategy – but does current UK regulation go far enough? Ruth Deardon, Product Line Manager at JELD-WEN looks at what can be done to ensure fire doors perform as needed. The critical importance of fire doors has been recognised throughout the recent scrutiny and revision of building regulations following the Grenfell tragedy, where a system found “not fit for purpose” by the Hackitt Review has been overhauled and strengthened to improve the fire safety of our buildings. This has led to the creation of the Fire Safety Act 2021, the Building Safety Act 2022 and the Fire Safety (England) Regulations 2022, which seek to address many of the recommendations made in Dame Hackitt’s report. These sit alongside, and in some cases modify, existing legislation impacting fire doors such as the Building Regulations Approved Document B and the Fire Safety Order. This new legislation sets requirements on how fire doors are maintained by a designated “Responsible Person”. All high-rise buildings, where applicable, will be managed by a Building Safety Manager, who oversees the fire door specification, door fitting and maintaining these in service. Without doubt, this is a welcome move towards increased responsibility on fire safety, but does it go far enough? JELD-WEN believes that without formal training or qualification for installing fire doors, we are missing one vital component in managing this risk. Fire doors are a specialist construction item and due to reliance on past accepted practices we rely on a fitter’s competence and duty on how well they fit doors on site.  Even a perfectly manufactured fire door will ultimately fail if it is not installed or maintained correctly. This is a question not only of training, but also visibility across stages of a building’s life. Achieving a “Golden Thread” for construction projects, where all named stakeholders have access to a trail of readily available fire safety informationwill make a huge difference to how well fire doors are installed, maintained and, when necessary, replaced. Right now, this isn’t part of our building regulations. The definition of “Responsible Persons” still must be defined in context of the Fire Safety Act. Duties around fire door checks, any remedial work needed and other practices within the life span of a fire door again require attention. What can be done? Ultimately, fire doors are one of the most critical safety features of any building but will only perform as they should if properly specified, installed, inspected and maintained. Here at JELD-WEN we believe that there are a number of key areas of focus to address if we are to ensure every fire door can perform as intended. Firstly, we think it is worth looking at areas where stricter legal requirements could be implemented. The most important criteria is making it mandatory to use only third-party certified fire doors which will ensure best-in-class practice and the door’s consistent performance. This should be coupled with ensuring all fire door installations and maintenance work is carried out by qualified and accredited fire door installers. Making it a legal requirement to mark every fire door with its source manufacturer and performance will help to improve the traceability of doors within the UK housing stock. This task could be managed as part of a mandatory “Golden Thread” standard as it outlines how fire door information should be stored, updated and shared. This data should include manufacturer name and third-party certification, installation details, maintenance records, and blueprints all stored in an easily accessible digital format. Finally, more government support is needed in tackling the fire door safety skills gap, including creating more apprenticeship opportunities and an education campaign designed to raise awareness of the opportunities available within the sector. Looking to the future Ultimately, while the UK’s overall fire strategy is certainly shifting in the right direction, there is still some way to go, particularly when it comes to fire doors. A fire door, after all, is much more than just a door. It is one of the most critical components of limiting the spread of fire in a multi-storey building. As an industry, we must continue to work closely on each part of the fire door process to limit avoidable risk and help to keep people safe in their homes. After all, every fire door properly installed and maintained is another chance to save lives. For more information on the JELD-WEN range of commercial fire doors visit: https://www.jeld-wen.co.uk/behind-every-doorset/

Read More »

Hear from Paul Morrell OBE on The Independent Review of the Construction Product Testing Regime

We are pleased to announce that Paul Morrell OBE will be delivering an Executive Summary of the Independent Review of the Construction Product Testing Regime at the FPA’s InfoZone Theatre at FIREX (Stand F11850) on Wednesday 17 May from 14:15 – 15:15. The Independent Review of the Construction Product Testing Regime was announced by government in April 2021 and was led by Paul Morrell OBE and Anneliese Day KC. In this talk for FIREX, hear from one of the co-authors for the first time since the much-anticipated report has been released. The purpose of the Review was to identify any potential weaknesses in the system and to make recommendations for improvement. It undertook a critical assessment of the system for testing and certifying construction products and how the system could be strengthened to provide confidence that construction products are safe and perform as labelled and marked.“This report marks a major step forward in mapping the complexity and opacity of the current construction product regime and also identifies ways in which significant improvements can and should be made” – Dame Judith Hackitt. REGISTER HERE….. About Paul Morrell OBE Paul is a chartered quantity surveyor and was formerly senior partner of Davis Langdon (now part of Aecom), where he had worked since graduating from university until retiring in 2007. He was awarded an OBE in the 2009 New Year’s Honour list for services to architecture and the built environment. He was subsequently appointed as the Government’s Fire Chief Construction Adviser, with a brief to champion a more coordinated approach to affordable, sustainable construction. Paul now practises as an independent consultant, principally concerned with governance and setting up major projects; and wider cross-industry issues. View the full InfoZone programme here Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
BM TRADA & Warringtonfire to explain product performance and third-party certification at FIREX 2023

BM TRADA & Warringtonfire to explain product performance and third-party certification at FIREX 2023

BM TRADA/Warringtonfire will be returning to FIREX with a stand explaining the process of fire testing and classifying construction products, and the importance of third-party certification. Delegates attending the show at the London ExCeL between 16 – 18 May 2023, can visit the BM TRADA/Warringtonfire stand (FI.1430) to interact with display models of key construction products including fire doors, glazing systems, pipes and cables, all of which have been subjected to fire resistance testing. The team’s technical experts will also be on hand to discuss the principles of third-party certification for manufacturers, installers, and maintainers of passive fire protection products and the important role played by its Certifire and BM TRADA Q-Mark certification schemes. Each day, BM TRADA/ Warringtonfire, which are UKAS-accredited third-party certification bodies, will carry out live demonstrations of correct fire door installation, and how to install fire stopping measures – running at 12pm and 2pm respectively. Visitors attending on Wednesday 17th May can hear about the methods used to derive European classifications for construction products, when technical manager, Peter presents in the FIREX theatre at 2.15pm. The European classification standards (EN 13501 series) define harmonised procedures for classifying the resistance and reaction to fire performance of construction products. Peter’s presentation will cover test methods, the extension of scope using direct (DIAP) and extended application (EXAP) rules, classification process, product families and using classifications for UKCA marking and third-party certification. Peter Barker, technical manager at Warringtonfire, said: “Third-party certification is once again the overriding theme of FIREX, given its fundamental importance to the design, construction and operation of safe and secure buildings. We are looking forward to engaging with delegates on a broad range of topics and hope to provide direct and informed guidance on navigating the fire safety challenges facing today’s built environment.” For more information, please visit: www.warringtonfire.com / www.bmtrada.com. Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
IMA’s Seven Steps to Fire Safety Online CPD Now Available

IMA’s Seven Steps to Fire Safety Online CPD Now Available

Insulation Manufacturers Association (IMA) has created an online CPD – Seven Steps to FireSafety – focusing on the context of fire in relation to the built environment and the priorities for fire safety. Aimed at anyone interested in the design, construction and operation of buildings the CPD outlines the seven steps to fire safety that will protect people and buildings, and how each step is an integral part of the building design. Certified by CPD UK and the Chartered Institute of Architectural Technologists (CIAT), the CPD – Seven Steps to Fire Safety – will enable viewers to reach an understanding of material science, product testing, product classifications and how this relates to regulations and standards.  It will provide insight into the seven steps to fire safety and how each step is critical to the fire performance of a building. “The way we build and the importance of fire safety cannot be understated,” commented Simon Storer, Chief Executive of the IMA. “Whilst fire safety is a fundamental expectation of the modern built environment, it is important that fire safety is not compromised in order to deliver other performance standards. This CPD presentation will help construction professionals gain a better understanding of the priorities for fire safety, the importance of taking a holistic approach and how each of the seven steps to fire safety plays a key part in ensuring buildings are designed and built to the required standards.” To view the online CPD module, please click on the following link IMA CPD – Seven Steps to Fire Safety For more information about IMA visit www.insulationmanufacturers.org.uk                                 Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
Partel’s Evolving Range of Fire Performance Construction Membranes

Partel’s Evolving Range of Fire Performance Construction Membranes

Partel, a leading manufacturer of air and wind tight membranes, has combined a decade of industry experience and technical knowledge to develop two new fire-rated breather membranes EXOPERM DURO A1 and EXOPERM MONO DURO A2, that surpass current fire safety regulation levels for high-rise and high-risk buildings. These high-performance membranes are designed to achieve the highest levels of fire performance while also protecting the building structure by allowing vapour to diffuse from within the structure towards the exterior keeping the internal components of the wall dry, preventing ‘thermal bypass’ of external air through the insulation, and also performing the secondary task of weather protection and preventing penetration by external environmental impurities such as wind and rain. Suited to offsite and onsite construction, residential or commercial projects, both products are fully independently certified and tested in accordance with EN13501-1. The membranes are compliant with Document B Fire Safety and are suitable for use in a range of external wall types, especially in high rise buildings or those that pose a greater risk of fire safety. “At Partel, we are proud to introduce our additional fire-rated breather membranes, EXOPERM DURO A1 and EXOPERM MONO DURO A2, which go beyond current fire safety regulations and complement our limited combustible vapour control layer IZOPERM PLUS A2” said Hugh Whiriskey, CEO of Partel. “We are committed to developing advanced membranes that will help to facilitate offsite manufacturers, contractors, and architects create facades that are fully non-combustible.” Introducing EXOPERM DURO A1 EXOPERM DURO A1 is a newly engineered breather membrane that incorporates advanced technology with an integrated glass fibre fabric to achieve the highest fire performance levels. This CE and UKCA marked membrane is A1 non-combustible and is suitable for use on closed joint facades. It balances other technical attributes alongside fire in order to ensure long-term protection of the building envelope, highly vapour open with an Sd value of 0.03m, Class W2 resistance to water penetration, superior aging resistance and dimensional stability. Introducing EXOPERM MONO DURO A2 Partel’s EXOPERM MONO DURO A2 is an innovative airtight yet vapour permeable façade membrane, based on Monolithic Technology. This CE and UKCA marked membrane is Class A2-s1,d0, guaranteeing limited-combustibility, absent or very limited smoke emissions and no burning droplets. It is suitable for use on open or closed joint facades, providing architects with greater design freedom. It balances airtightness, moisture management and secondary weather protection with fire performance and is incredibly vapour open boasting an Sd value of 0.09m, air permeability value of 0,006 m³/m², h, Pa,  Class W2 resistance to water penetration, superior aging resistance and dimensional stability. Complete System Partel’s membrane solutions are further complemented by ECHOSEAL ALU FR, a fire-rated air and windtight adhesive tape specifically designed for use with Partel’s fire performance membranes. The tape ensures that membrane overlaps, window, and door connections are securely sealed. It can be used internally and externally due to its particular technological functions. Delivering Exceptional Performance Partel’s newly developed fire-rated breather membranes, EXOPERM DURO A1 and EXOPERM MONO DURO A2, exceed current fire safety regulations and provide superior protection of the building envelope. Independently certified and tested in accordance with EN13501-1 and compliant with Document B Fire Safety they can help facilitate the creation of non-combustible facades and offer peace of mind that the products are tested and certified to the latest industry standards. For more information visit Partel or contact a member of the Partel team to discuss requirements for your next project. Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
srththdfghdfg

The significance of fire doors to a building’s fire safety

The Grenfell Tower Inquiry (Phase 1) identified numerous failings including compromised escape routes and fire doors that did not, through damage and/or disrepair, act in the way that they should to prevent smoke and gases from spreading. As such, the Inquiry recommended (Recommendations 33.29 (a) and (b)) that the owner and manager of every residential building containing separate dwellings carry out an urgent inspection of all fire doors to ensure compliance with current legislative standards and that regular (no less than every three months) checks be carried out to ensure all fire doors are fitted with an effective self-closing device which is in working order. The Inquiry also recommended (Recommendation 33.30) that all those who have responsibility for the condition of the entrance doors to individual flats in high-rise residential buildings (with unsafe cladding) be required by law to ensure these doors comply with current standards. As a direct result, Article 24 of the Regulatory Reform (Fire Safety) Order 2005 introduces enhanced fire safety regulations. The Fire Safety (England) Regulations 2022 were published on 6 December 2022 and came into effect in England from 23 January 2023. The regulations introduced changes with regards to fire doors which have an impact for the Responsible Person. They require responsible persons in multi-occupied residential buildings which are classed as high-rise buildings, (defined in The Fire Safety (England) Regulations as a building at least 18 metres in height or at least seven storeys), and also those above 11 metres in height in an identical use of multi-occupation residencies where communal areas and escape routes exist, to provide new additional safety measures with regards to the periodic and ongoing inspection of fire resisting doorsets. Quarterly inspectionsIt is now a legal requirement in high-rise buildings and multi-occupied residential buildings more than 11 metres in height to undertake quarterly inspections of fire resisting doorsets (including their self-closing devices) in the common areas, as these doors are subject to considerable use and subsequent failings or damage. This includes (but is not limited to) cross-corridor fire doors, staircase enclosure fire doors, and fire doors of protected lobbies and higher risk rooms such as plant rooms, riser shafts, and storage areas. Annual inspectionsThe new Fire Safety Regulations also state that it is now a legal requirement to carry out annual checks of fire resisting entrance doorsets to apartments or flats on a ‘best endeavours’ basis, with a procedure identical to the above, identifying and recording findings and actioning any remedial works required to return the door to a compliant nature. Information for residentsThe Responsible Person must also now provide residents with information relating to the significance of fire doors to a building’s fire safety, highlighting the importance of not removing or disconnecting self-closing devices, keeping fire doors closed, and immediately reporting any faults or damage to doors. This needs to be documented to ensure all residents are provided with the directive to protect the entire building and its occupants. Residents must receive this information when they move into a multi-occupied residential building, and on an annual basis thereafter. As a fire risk assessor inspecting such premises, there exists a requirement to evidence these practices, to identify failings, and make suitable and sufficient recommendations in the remedy of such failings. Fire risk assessmentsThe Fire Safety Act 2021 also states that ‘the effect of the Act will be to require fire risk assessments of buildings with two or more sets of domestic premises to be updated to take account of doors, if they have not already done so.’ This is detailed in section 9 as affecting ‘all doors between the domestic premises and the common parts (e.g. entrance doors to individual flats which open to common parts).’ This means that the Responsible Person should regularly review the fire risk assessment of their building(s) to ensure compliance, particularly if there is reason to believe it is no longer valid, or if significant change in the matters to which it relates has taken place. If these measures have already been considered within the existing current fire risk assessment, it is not necessary to have another fire risk assessment carried out whilst it remains compliant with this directive. Fire door inspection surveysWhilst a suitable and sufficient fire risk assessment typically involves a review of the condition of existing fire doorsets, it is unlikely that it will extensively cover all fire doors and frames so a fire door inspection survey may be required. At the FPA, our fire door inspectors conduct comprehensive, non-destructive fire door surveys and deliver detailed reports on the condition of the entire doorset. Find out more about the FPA’s fire door inspection survey service. Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
OFR Consultants Kicks Off 2023 With A Host Of New Projects

OFR Consultants Kicks Off 2023 With A Host Of New Projects 

Leading fire engineering consultancy OFR Consultants, has been appointed on several high-profile projects throughout the UK, supporting clients in the custodial, aviation and healthcare sectors. Among the new projects is a body of work with the Ministry of Justice (MoJ), with OFR appointed to work on fire engineering strategies for new prisons in Yorkshire, Lancashire, Leicestershire and Buckinghamshire. The new prisons will be created as part of the Alliance 4 New Prisons (A4NP) programme, a project that will see the development of four new adult male prisons built by ISG, Kier, Laing O’Rourke and Wates – a group of Tier 1 contractors working together as part of the government’s Construction Playbook. The A4NP will develop a standardised design that will then be applied across each of the four prison sites, building on the approach of the MoJ pathfinder common design prisons at HMP Five Wells and Glen Parva. Speaking of the appointment OFR design director Richard Rankin said: “This is a unique sector, and we are proud to be a part of this ambitious new approach by the MoJ. “The custodial sector requires unique thinking, and my colleagues and I are preparing fire strategies that will consider the complexities and layout of prisons, evolving an idea that will accommodate each individual site, while also accounting for the standardised design approach. It is an exciting opportunity, and we are delighted to be involved.” OFR has also undertaken a new £330m project with the Royal Shrewsbury and Telford NHS Trust to refurbish an existing hospital and build a new facility, with the news coming just weeks after OFR announced the appointment of more new colleagues to its team; the consultancy now employs 115-colleagues across seven UK offices in Manchester, Edinburgh, Glasgow, Leeds, Oxford, Bath and London. In Q4 2022, the company also welcomed new graduates, part of its commitment to investing in and nurturing future engineering talent. Rich concluded: “Since 2016, we have grown to become one of the UK’s leading fire engineering consultancies, developing our business and growing our team by nurturing a strong culture and investing in great people. The result is a motivated team working with clients across the world to deliver fire engineering strategies that protect people, place and planet. “I’m really proud of the new work we are delivering together and look forward to bringing these new projects to fruition.” Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »
Construction workers unite to improve fire safety

Construction workers unite to improve fire safety

The Construction Industry Training Board (CITB) is calling on all construction workers to help improve fire safety across the industry. Following the Grenfell Tower tragedy in 2017 and subsequent inquiry, the industry has worked hard to increase safety standards to prevent such an incident from happening again. One outcome has been the recognition of a lack of knowledge and adherence regarding fire safety across the industry. To help improve standards CITB, in consultation with the industry, has been developing two new online courses, both related to fire safety. The first course – Fire Safety Awareness in Construction and the Built Environment – has been launched across the UK for workers of all levels and occupations. Although not mandatory, workers are being urged to complete the free eCourse, which offers an overview of basic fire safety awareness in construction and the built environment. Employers are also being asked to direct all workers, staff or subcontractors, to complete the course. It covers topics such as how fires start, grow and spread, as well common sources of ignition and fuel on site, fire prevention and protection measures, safe evacuation and the impact of fire on the environment, communities and individuals. The second eCourse – Fire Safety in Buildings – will be available this summer. The course has been created in collaboration with Working Group 2 and Build UK and is pitched at a higher level than the first course, with the aim of providing industry a greater level of knowledge of fire safety in buildings, following the construction stage. It builds on the FSA course by focusing further on key topics such as how legislation and regulations have changed since the Grenfell tragedy. It also offers guidance on holistic fire safety, fire prevention (materials), protection (passive and active), compartmentation, protected escape routes, workmanship, competence, quality, reporting issues and concerns.  Building, Design & Construction Magazine | The Choice of Industry Professionals 

Read More »