Edwin James Group, a leading provider of multi-disciplinary engineering services, is nearing completion of a project to assist the North London Waste Authority (NLWA) in its £1.42 – £1.52 billion North London Heat and Power Project. The project aims to create the greenest Energy Recovery Facility in the country, along
The correct choice of cabling under the new building safety regime is critical in protecting lives and property, says AEI Cables. The company is highlighting the crucial part played by electrical safety systems including cabling in the development of higher risk buildings under the new Building Safety Act 2022 which
SELECT Managing Director Alan Wilson has told thousands of radio listeners across the UK that proper training and apprenticeships are essential to protect the safety of consumers and others in the construction industry. Speaking on the popular Building Ideas Show with Mark Millar on Fix Radio, the MD of Scotland’s largest
Engineering students at UTC Heathrow got the rare opportunity to tour an operational CyrusOne data centre, seeing for themselves the racks of servers used to store computer data (email, website, online transactions, etc) for some of the biggest companies in the world, along with the electrical and mechanical equipment needed
The Building Engineering Services Association (BESA) has called for a major injection of funding and planning into addressing the skills shortage which is preventing the refurbishment and retrofitting of buildings in line with the government’s carbon reduction targets. A study by the recruitment firm Reed Environment estimated that current rates
Karen Boswell OBE, Managing Director of Baxi UK and Ireland, has been appointed the new chair of the Heating and Hotwater Industry Council (HHIC). Succeeding the outgoing chair Steve Keeton, Director of External Affairs and Future Portfolio at Vaillant, Karen is the first female chair of the HHIC and is
South Staffordshire Plc’s compliance division, which includes the Omega Red and IWS Water Hygiene brands, welcomes Edward Shepherd as its new Operations Director. Edward will join the senior management team, overseeing all operational aspects for both businesses. Edward brings a wealth of experience to his new role, having held senior
AN ALL-female panel of built environment experts gathered recently for international M&E consultancy CPW’s ‘INWED 2023: Sustainability in the Second City’ roundtable to discuss the importance of retrofitting to tackle net zero and why sustainability is a significant opportunity to attract more women to the engineering industry. Held at CPW’s
Harley Haddow has received one of the top prizes at The Grafters Awards, scooping the best Mechanical and Electrical Consultancy award. The ceremony which took place last night (Thursday 29th of June) at The Mercure Picadilly Hotel in Manchester, recognised the best of the Northwest construction and property industry. Hosted
SELECT, Scotland’s largest construction trade association, has welcomed three major new enterprises to its growing Associate Membership Scheme as it continues to attract an impressive line-up of market-leading manufacturers and organisations. Schneider Electric, Robus LED Group and CompEx have all joined the 25 existing Associates who have built mutually beneficial
Edwin James Group, a leading provider of multi-disciplinary engineering services, is nearing completion of a project to assist the North London Waste Authority (NLWA) in its £1.42 – £1.52 billion North London Heat and Power Project. The project aims to create the greenest Energy Recovery Facility in the country, along with state-of-the-art recycling facilities. Working together, group companies EJ Parker Technical Services and EJ Peak Technology Solutions delivered complex projects totalling over £37m, covering comprehensive mechanical and electrical (M&E) services, extensive automation and control implementation and the largest solar array in North London. EJ Parker Technical Services was responsible for the design, supply, installation and commissioning of wide-ranging M&E works. These included lighting, venting and AC, security and fire suppression, waste management, and rainwater collection. The team also installed 2,235 solar modules and 11 Solis Inverters that will produce renewable energy, equivalent to powering 300 homes a year. The implementation of this sustainable energy solution is projected to reduce CO2 emissions by 334,602 kg per year, equivalent to the impact of planting 8,830 trees annually. EJ Peak Technology Solutions was engaged to collate a comprehensive control philosophy for the site, including electrical and fibre optic network design, systems architecture, and various aspects of the infrastructure. The team consulted with all package vendors in order to design and integrate their systems into the new bespoke SCADA (Supervisory Control & Data Acquisition) system and ensured that all logistical movements and efficient site operational needs were met whilst complying with necessary legislative requirements. Subsequently, Peak was commissioned to carry out the entire works scope, based on the approved design, including a new site-wide PLC control system, new SCADA build/deployment, and full design/integration of the new site-wide BMS system. Commenting on the project, Christopher Kehoe, CEO, Edwin James Group, said: “Given the complex and regulated nature of the project, the combined efforts of both companies have been crucial in its successful execution. We believe in harnessing innovative technologies and collaborative teamwork for a greener future and are proud to support the North London Waste Authority in its mission to establish the greenest waste hub in the country. Together, we are setting new standards for waste management, renewable energy generation, and carbon reduction.” The project was awarded by Taylor Woodrow as part of a major contract to deliver the first Reuse and Recycling Centre open to the public at the site. Edmonton EcoPark is a waste management site of approximately 38 acres. The existing Energy from Waste facility is coming to the end of its life, having served north London for over 50 years. The redevelopment aims to generate electricity for 127,000 homes, provide hot water and heating for 60,000, and improve air quality using advanced technology, saving the carbon equivalent of removing 110,000 cars annually. Building, Design & Construction Magazine | The Choice of Industry Professionals
The correct choice of cabling under the new building safety regime is critical in protecting lives and property, says AEI Cables. The company is highlighting the crucial part played by electrical safety systems including cabling in the development of higher risk buildings under the new Building Safety Act 2022 which is now in force. For the construction industry and electrical safety systems, it means an overhaul in existing regulations with clear guidelines on the construction and management of higher risk buildings. Stuart Dover, general manager of AEI Cables, said: “We cannot stress enough that the changes under this legislation cover the whole supply chain including electrical safety systems and cabling. “Ensuring the correct selection of cabling has been made will be a fundamental part of safety in the systems installed into high-risk buildings. We are happy to provide guidance on these issues as the wrong choice could compromise whole systems. “This is an opportunity for the electrical safety industry to work together wherever relevant through the supply chains. If these systems fail because the cable is not able to function properly then the consequences are apparent.” The systems powered by electrical cables – including smoke and heat extraction systems – assist fire services in firefighting and a safe evacuation in the case of life safety. The new Building Safety Act 2022 has been developed as a new framework for the design, construction and occupation of higher risk buildings. These buildings are defined as being a minimum of 18 metres or seven storeys in height and comprise of at least two domestic premises. AEI Cables’ Firetec Enhanced cabling has been approved and certified by LPCB to BS8519 (Annex B), Category 3 Control in addition to Category 2 Control.The BS Code of Practice under BS8519 contains six categories of cables, three for power cables and three for control cables each covering survival times of 30, 60 or 120 minutes. All AEI Cables’ products are supplied with approvals from independent bodies including BASEC and LPCB. It also holds approvals from organisations including Lloyds, the MoD, Network Rail and LUL and works to international standards around the world. For more information see the AEI Cables website, tel 0191 410 3111 or email sales@aeicables.co.uk. Building, Design & Construction Magazine | The Choice of Industry Professionals
SELECT Managing Director Alan Wilson has told thousands of radio listeners across the UK that proper training and apprenticeships are essential to protect the safety of consumers and others in the construction industry. Speaking on the popular Building Ideas Show with Mark Millar on Fix Radio, the MD of Scotland’s largest construction trade association said that young people gain a thorough and rigorous grounding in quality and site safety via industry recognised apprenticeships. And he said that regulation of the electrical industry and protection of title for suitably qualified electricians was also essential to maintain and improve standards and safety in consumers’ homes. Alan told listeners: “The fact is that awareness of safety starts at the very beginning, and that means with apprentices, which is why our industry has run a successful electrical apprenticeship programme for many years. “This year, we have recruited almost 900 apprentices which is testament to the businesses in Scotland who put their faith in young people and as adults they take on. That’s where safety starts. “These people go through a proper apprenticeship. It’s not one of these short apprentice programmes which lasts six months or a year. It’s four-year programme in which the apprentices attend college and receive comprehensive health and safety training.” Alan also used his appearance on the show on Sunday 10 September to outline the importance of protection of title for electricians – a campaign which SELECT has been spearheading for many years. He said people were now talking about the electrification of society through heating, lighting, cars, computers and day-to-day devices, so it was increasingly vital that work was done by qualified electricians. Alan said: “Electricians do safety-critical work and if they get it wrong it can have potentially life-ending consequences for them or the people they do the work for. It’s not overstating the situation to say that work carried out by unqualified people can be fatal. “There are some 70 protected titles, from obvious ones like teachers, dentists and nurses to other trades like farriers and nightclub bouncers. So if you want to shoe a horse in the UK, you need to have qualifications and it’s a protected title, yet that doesn’t apply to electricians. “If electricians had protection of title, people would know that if someone came to their door claiming to be an electrician then they could confirm they were qualified. “We are trying to get rid of people who have no training – it’s about protecting the public and the perception of the industry.” SELECT has been campaigning for regulation for years alongside the Scottish Electrical Charitable Training Trust (SECTT) and Scottish Joint Industry Board (SJIB) and has created a Wall of Support to show the depth of support from individuals and organisations. Recent additions include Foysol Choudhury MSP, SELECT Associate Members Building Safety Group, LINIAN, Flexel and Hager andmember firms Stirling Electrical Services, RW Bell, John McNicol & Co and FT Davidson. As well as more than a third of MSPs, other bodies that have contributed a brick to the wall include the Unite the Union, Electrical Safety First, The Royal Institution of Chartered Surveyors, the Scottish Association of Landlords, the and the Energy Saving Trust. Building, Design & Construction Magazine | The Choice of Industry Professionals
Engineering students at UTC Heathrow got the rare opportunity to tour an operational CyrusOne data centre, seeing for themselves the racks of servers used to store computer data (email, website, online transactions, etc) for some of the biggest companies in the world, along with the electrical and mechanical equipment needed to support such important infrastructure. Shortly before school broke for the holidays, seven engineering students visited CyrusOne’s LON1 site based in Slough, where they met Jacob Dowsett, Regional Operations Director, and Steve Hayward, Vice President European Operations. Jacob was especially inspirational, telling the students about his unconventional path into his role: “What we are hoping to do is shed light on this industry and make the route for your generation more straight forward,” he said. The purpose of the tour was to support the learning these students have been doing on the data services industry as part of their Engineering BTEC course through the Digital Futures Programme. This programme, unique to UTC Heathrow, is designed to open opportunities for students to explore an array of careers within the data services industry, as well as equipping them for other technical careers. Although the programme has been running since 2021, this is the first time any of the students have visited a fully operational data centre. Having made sure that their clients were happy with the students being shown around, CyrusOne were delighted to offer the inaugural tour. CyrusOne’s Jacob Dowsett explained how vital it is for students to be able to see the workings of the data centre in person. “It’s so important for the students to be able to visualise these data centres and see for themselves. Obviously, it’s data sensitive, really high security, but without these experiences – showing the students what’s actually inside the data centre and what engineering roles there are, they’re not going to want to join the industry. They need to see things up and running and see themselves doing it.” On the day, students were shown a short presentation on what happened at the data centre (which the students were already pretty clued up on), before starting the ‘electrical tour’. Much to the students’ delight, this involved the big switch on of a power generator. It was big and loud – the boys loved it naturally! They were shown how it worked by an engineer – but it wasn’t a passive watch. Like all good school trips, the students were armed with a clipboard containing questions they were required to answer. This meant they were actively engaged, listening to the engineers and most importantly learning. The second part of the tour looked at the mechanical side – the cooling system. Data centre servers generate a lot of heat, so all require some kind of cooling mechanism, in this case an Adiabatic* cooling system. Kitted out with boots, hi-vis and lanyards, the students got to really visualise how a data centre works. They spoke to some of the engineers, asking intelligent questions about how the equipment works and what engineers at CyrusOne do – and what the earning potential is. Something that really gave the students food for thought was the company’s vision of a sustainable future and what they could do to be a part of that. CyrusOne’s Hanna Chegrouche, Marketing Coordinator said: “I think the younger generation need to feel valued in industry and feel like they’re part of a bigger impact. So while we were talking about the now of being an engineer, we were also talking about the headwinds that we face and how engineers have a big part to play. We looked at our new facility, LON6, through a VR headset experience and I think they were surprised – it looks so different to what you perceive a data centre to look like, with the biodiverse surrounding areas and timber framed interior, you won’t even think that was a data centre city at all.” For many of the students who were already considering a career in the sector after school, this tour made them even more determined! ALET Project Coordinator Candace Rose Kumi, who is based at UTC Heathrow said: “The advice given to students was fantastic, they left feeling inspired and wanting to know more about the industry. They gained a better understanding of electrical and mechanical equipment within a data centre as well as the future works.” One of the students, Lucas, went on: “This was a great opportunity and has helped me to decide that I would love to start a career in the data centre industry. Everyone was very enthusiastic and informative, and I am very grateful to the CyrusOne team for this experience.” Summing up, another of the visiting students, Yaseen, said: “I found the trip to be fascinating because of the orderliness of such a complex operation. Everything was so under control to the point where any issue they have is predictable and resolvable in seconds, if not minutes, and I found this to be an inspiration for how I should maximise efficiency in my day-to-day life. I was surprised to see how relaxed everyone was given that if the servers were to go down it would cost them thousands of pounds, but I think they are so organised that they never need to worry. They were very welcoming and willing to explain any questions we had and went out of their way to make it a great day for us.” . Building, Design & Construction Magazine | The Choice of Industry Professionals
The Building Engineering Services Association (BESA) has called for a major injection of funding and planning into addressing the skills shortage which is preventing the refurbishment and retrofitting of buildings in line with the government’s carbon reduction targets. A study by the recruitment firm Reed Environment estimated that current rates of recruitment for professions carrying out building retrofit work would have to triple if the country was to meet its 2050 Net Zero target. It concluded that the UK is currently on track to miss the required number of building energy efficiency upgrades by 55 years – only reaching it in 2105 – due to “a serious shortage of retrofit training and recruitment pathways”. BESA said building retrofits should be “a main policy and business pillar of Net Zero”, but that the country was falling behind its targets due to the lack of a comprehensive plan for how the 2050 target could be delivered. “Retrofitting homes and commercial buildings needs to be a main building block of Net Zero,” said the Association’s director of training and skills Helen Yeulet. “This requires a serious acceleration in recruitment of the necessary skills, which will also underpin business growth and job creation in the sector.” LaggingThe UK is also lagging comparable European countries when it comes to retrofit work, according to research from the MCS Charitable Foundation, which revealed it was installing less than a tenth of the number of heat pumps as France despite having a similar heating market. Only 55,000 heat pumps were sold in the UK last year, compared with 621,000 in France. 20 other European countries also had higher installation rates than the UK, which is being held back by the lack of a comprehensive and consistent plan for ‘green skills’, according to BESA. The MCS report said that there was currently “little chance” of the UK meeting the government’s target of 600,000 heat pump installations a year by 2028. However, with a proper skills strategy it should be possible to create 50,000 new jobs in this market, up from just 2,000 today. BESA welcomed the launch of the government’s £5m Heat Training Grant which offers £500 towards heat pump training for self-employed installers, the unemployed and those working for a business with 250 employees or less. It is expected to help upskill around 6,000 heating engineers, but the Association said it was important that the government made long-term policy commitments and abandoned its ‘stop-start’ approach to funding. “Employers need to have the confidence to invest in their workforces and diversify their businesses,” said Yeulet. “We need to take a leaf out of France’s book.” She also called for the government to give a clear commitment to the Future Homes and Building Standard, which is due to come into force in 2025 and would set energy efficiency benchmarks that could drive retrofit work. France has benefited from energy efficiency and electrification of heat being political priorities for more than a decade underpinned by generous financial incentives. The installation market grew from 100,000 a year in 2010 to over 600,000 last year and France now has more than 30,000 people employed full time in heat pumps. “There is no mystery about why other countries are doing better than us,” said Yeulet. “They have clear policy commitments and long-term, properly funded training programmes in place that give employers the confidence to invest and grow their businesses. “We have been talking about this for years, but this is not just about government. We all need to step up and do what we promise by investing in our workforces. Not just because it is the right thing to do for the planet, but also because the potential for business growth is huge.” Building, Design & Construction Magazine | The Choice of Industry Professionals
Karen Boswell OBE, Managing Director of Baxi UK and Ireland, has been appointed the new chair of the Heating and Hotwater Industry Council (HHIC). Succeeding the outgoing chair Steve Keeton, Director of External Affairs and Future Portfolio at Vaillant, Karen is the first female chair of the HHIC and is set to lead the membership following the Council’s recent AGM. Since joining Baxi as Managing Director almost three years ago, Karen has successfully led Baxi at the forefront of innovations in low carbon technology and installer support as the heating industry looks to decarbonise. This includes recent work with Government to make training more affordable and attractive to installers through the Heat Training Grant, which was launched this month. Karen also brings rich experience as a leader in the engineering space across multiple industries – most notably the rail industry heading up Hitachi Rail’s UK division. In her new role as chair of the HHIC, she brings strong focus on business improvement and accelerating growth, is passionate about equality, diversity and inclusion and has extensive experience in manufacturing, supply chain and customer service. As the heating industry continues its progress decarbonisation and develop the skills required to achieve it, Karen’s leadership experience and expertise are set to drive forward the HHIC’s focus on advancing the heating industry to net zero. Karen Boswell OBE said: “I’m delighted and privileged to have been selected to Chair the HHIC Board. I want to thank Steve Keeton, our outgoing Chair, for his leadership during the incredibly difficult lockdown period we’ve all endured, and for his work despite the challenge of the pandemic, with business transformation, innovation and helping shape Government policy. “Our industry is at the forefront of enabling solutions for decarbonising heat and hot water in UK homes and businesses. The next three years are going to be incredibly important and exciting as we help move customers towards their carbon reduction targets and ambitions. “Our members are best placed to provide expert advice to government and support the development of the right decarbonisation policy that benefits everyone. “One of my clear focus areas will be on growing our skills base to deliver this critical, transformational role. We must attract, train and reward new talent from all walks of life, reflecting the customers and communities we serve. The decarbonisation agenda is a great career opportunity and we need to work better at demonstrating how attractive this sector is; delivering clean heat and hot water in homes and buildings is a fundamental component of our national ambition for net zero.” Stewart Clements, Director of the HHIC, said: “We are pleased to announce Karen’s appointment as chair following a commendable tenure from the outgoing Chair Steve Keeton. Our industry is at a pivotal and exciting point. New technologies like heat pumps and hydrogen further down the line mean there is exciting opportunity for jobs and making a difference in the UK’s decarbonisation journey. “However, our research has found that there is a large skills gap that we must fill if we are to make any progress. Encouraging more people into the industry with a focus on improving diversity, equity and inclusion is a next crucial step to attracting more people into this exciting sector at a time of great progress and innovation.” For more information about the HHIC and to see its latest research reports, click here. For more information about Baxi, click here. Building, Design & Construction Magazine | The Choice of Industry Professionals
South Staffordshire Plc’s compliance division, which includes the Omega Red and IWS Water Hygiene brands, welcomes Edward Shepherd as its new Operations Director. Edward will join the senior management team, overseeing all operational aspects for both businesses. Edward brings a wealth of experience to his new role, having held senior positions within a service provision business and demonstrating extensive expertise in the engineering industry. Previously, Edward had eight years of experience as Service Operations Director at MSA The Safety Company, a decade of experience at Bristol Uniforms Limited and four years in a senior position at Thales. Known for his dedication to developing individuals and organisations, Edward is committed to delivering operational efficiencies. With a clear focus on optimising processes and improving overall performance, he will play a crucial role in advancing the compliance division’s operational capabilities. “We are thrilled to welcome Ed to our team,” said Neil Shailer, Managing Director of the compliance division. “Ed’s extensive background in service provision and engineering, coupled with his passion for driving operational efficiencies, make him an invaluable addition to our compliance senior management team. We are confident that his leadership and expertise will contribute significantly to our ongoing success.” The compliance division of the Group offers lightning protection services, electrical earthing solutions, height safety solutions, legionella control and water treatment services all of which help clients achieve compliance to a range of relevant standards and regulation. Building, Design & Construction Magazine | The Choice of Industry Professionals
AN ALL-female panel of built environment experts gathered recently for international M&E consultancy CPW’s ‘INWED 2023: Sustainability in the Second City’ roundtable to discuss the importance of retrofitting to tackle net zero and why sustainability is a significant opportunity to attract more women to the engineering industry. Held at CPW’s city centre office on Colmore Row, the event saw a ten-strong panel of local experts discuss a wide range of topics for International Women in Engineering Day. This included where Birmingham is on its journey to becoming net zero by 2030 and how far funding will stretch, through to the pros and cons of well recognised sustainability accreditations and how engaging with educators will help increase industry diversity. Hannah Kissick, associate in innovations and sustainability at CPW, said: “It was very inspiring to host an event attended by women with impressive and extensive experience in the built environment. The range of topics we covered and the enthusiasm for collaboration during and after the session definitely gave me confidence that more solutions can be found for our journey to net zero in Birmingham and for creating a more accessible industry. “Where there is a challenge there is always an opportunity, and this event reminded me that we can harness the interest in sustainability among the younger generation to position engineering as a key industry needed to meet sustainability targets.” The professionals in attendance explored the processes of value engineering and design, asking questions of each other about how the gap between vision and reality can be bridged. However, factors such as cost and assurance were understandably noted as potential barriers to success. Despite this, an optimistic tone was maintained throughout the event due to the shared recognition of the quality young minds that are on the cusp of bringing new ideas into the industry. Ellie Hignett, principal portfolio officer – Route to Net Zero Carbon at Birmingham City Council, said: “It’s so important that occasions like International Women in Engineering Day continue to be celebrated and events like the one hosted by CPW continue to be supported. They bring important stakeholders together and enable vital industries like engineering to debate how we can overcome shared challenges – like net zero. “While funding plays a key role in what we can achieve in Birmingham, we must also invest time in education. Without the people needed in positions to focus on net zero, there is no infrastructure to carry out the work. We must also continue to use cooperation between the public and private sector to create a baseline for what is achievable, with retrofit being a very topical example amid ongoing debate around the best approach.” The panel was hosted by CPW, chaired by Charlotte Dove (Cartwright Communications) and featured Hannah Kissick (CPW), Michelle Ward (CPW), Tiv Kaur (AA Projects), Isabel Scruby (HUB Residential), Dr Monica Mateo-Garcia (Birmingham City University), Justine Doody (Wates), Rosie Peach-Robinson (EDGE), Rachel Care (Turner and Townsend), Ellie Hignett (Birmingham City Council) and Lois Taylor (Naismiths). With more than 300 staff based across 13 offices including two international offices in Poland and India, CPW specialises in designing and integrating a full range of building services into new and existing buildings to deliver cutting edge sustainable solutions that are not only energy efficient but are both financially and environmentally sustainable for clients. For further information on CPW’s sustainability work visit www.cpwp.com or follow @CPWengineering on social media. Building, Design & Construction Magazine | The Choice of Industry Professionals
Harley Haddow has received one of the top prizes at The Grafters Awards, scooping the best Mechanical and Electrical Consultancy award. The ceremony which took place last night (Thursday 29th of June) at The Mercure Picadilly Hotel in Manchester, recognised the best of the Northwest construction and property industry. Hosted by television and radio presenter, Jenny Powell, the awards, part of Grafters Super Group, celebrate achievements from those across the Northwest industry. Ian Chalk, director at Harley Haddow said: “We are delighted to have been awarded best Mechanical and Electrical Consultancy and are proud of the accomplishments we have made over the last year in the Northwest. “It has been an incredible journey so far from when we first opened our office in Manchester, with great project wins and team expansion. Winning something like this really consolidates all the hard work and dedication that has gone in across the consultancy and we can’t wait to build on this even more.” The consultancy is going from strength to strength, with this most recent accolade one of seven award nominations in 2023 so far. Having opened their Manchester office last year, the team is continuing to grow their Northwest hub with further recruitment ongoing. If you would like to know more about opportunities within Harley Haddow please visit: https://www.harleyhaddow.com Building, Design & Construction Magazine | The Choice of Industry Professionals
SELECT, Scotland’s largest construction trade association, has welcomed three major new enterprises to its growing Associate Membership Scheme as it continues to attract an impressive line-up of market-leading manufacturers and organisations. Schneider Electric, Robus LED Group and CompEx have all joined the 25 existing Associates who have built mutually beneficial relationships with SELECT’s member businesses over the past 18 months. The three new Associate Members will now be able to engage with SELECT’s experts and members, enjoy access to a wealth of services and benefits and work with the organisation to share the latest ideas and in-depth knowledge to the advantage of the wider industry. Iain Mason, Director of Membership and Communications at SELECT, said: “Everyone at SELECT is delighted that enterprises of the size and stature of Schneider Electric, Robus and CompEx have joined our Associate Membership scheme. “Becoming an Associate is an opportunity for partner organisations to build stronger relationships with key players in the electrical contracting industry, and also to ally themselves with an established and successful trade body.” SELECT, which represents around 1,250 electrical firms and 15,000 contractors across the country, launched the scheme early in 2022 to help develop a mutually complementary network of industry-specific partners. Mr Mason added: “Since its launch, the scheme has proved extremely popular and has allowed Associates to speak to our members both through our print and digital channels and also face-to-face at the many events we run across Scotland throughout the year. “It has also strengthened our own relationship with some of the industry’s most renowned names and allowed us to develop and grow events such as our Toolbox Talks, President’s Cup and President’s Lunch.” Schneider Electric, which traces its history back to 1838, drives digital transformation by integrating world-leading process and energy technologies to help businesses make efficiency and sustainability gains across their organisations. David Pownall, Vice President of Services at Schneider Electric UK & Ireland, said: “We have had a long and fruitful association with SELECT over the years, including sponsoring organisation awards, and we are proud to be included in an Associate Membership scheme which brings so many benefits to the electrical industry.” Robus is a Dublin-headquartered global lighting wholesaler with customers in more than 40 countries around the world. Established in 1984, it is now the biggest lighting company in Ireland. Mick G Slein, Chief Executive of Robus, said: “Becoming an Associate Member of SELECT completely aligns with our best-in-class mindset and our vision of being our customers’ most trusted LED lighting brand. We look forward to building strong and trusted relationships with SELECT members as we continue to grow internationally.” CompEx is the international scheme for competency validation and certification of people who work in explosive atmospheres. First established 30 years ago with the support of industry, its suite of training and assessment modules are delivered through a network of independent training and assessment centres to support electrotechnical practitioners in sectors including oil and gas, chemicals, pharmaceuticals, food and beverage manufacturing and utilities. Huw Bement, Managing Director of CompEx, said: “Our international safety and competency scheme is rooted in certifying electrotechnical technicians and engineers operating in hazardous areas – so becoming a SELECT Associate Member is hugely important for us. It’s a fantastic opportunity for CompEx to establish new industry connections and to continue building our existing relationships.” The trio’s arrival follows the announcement of Legrand UK & Ireland as SELECT’s 25th Associate Member earlier this year. The electrical and digital infrastructure specialist is part of Legrand Group, which has a presence in nearly 90 countries and employs more than 38,000 people. Other SELECT Associate Members include Hispec, V-Tac, Aico, Aurora, Electrium, Hager, Luceco, Megger, Scolmore and Thorn Lighting. SELECT has just completed its annual Toolbox Talks roadshows and is now involved in the organisation of the second Green Home Festival as a leading member of the Construction Industry Collective Voice (CICV). The organisation also continues to spearhead a long-running and high-profile campaign for regulation of the electrical industry, with the submission to Scottish Parliament of a Members’ Bill calling for Protection of Title. Building, Design & Construction Magazine | The Choice of Industry Professionals
