By Laura Smith – UK Head of Marketing CPG UK For the offsite sector, the focus is not just on building efficiently, but also manufacturing safe and complaint buildings. To achieve this, it is important that offsite manufacturers and their suppliers collaborate at the earliest opportunity. CPG Offsite Solutions, which
By Patricia Gabriel – Market Manager CPG UK Nullifire has developed a high-performance fire protection solution to meet the unique requirements of off-site construction. Nullifire FZ100 Fire Safe Zone has been engineered to provide best-in-class fire-stopping capabilities to existing and future service penetrations. Quick and easy to install, as well
Leading contactor, GRAHAM, has invested in enhanced fire awareness training for more than 100 of its employees in partnership with Nullifire, a fire stopping solutions and intumescent coatings manufacturer, part of parent brand CPG UK Ltd. Designed and managed by Area Sales Manager for Fire Protection at CPG UK, Colin
By Laura Smith – UK Head of Marketing CPG UK For the offsite sector, the focus is not just on building efficiently, but also manufacturing safe and complaint buildings. To achieve this, it is important that offsite manufacturers and their suppliers collaborate at the earliest opportunity. CPG Offsite Solutions, which encompasses seven brands – Nullifire, Illbruck, Tremco, Flowcrete, Dryvit, Nudura and Vandex, is an excellent example of how industry collaboration in practice allows for specialist solutions to be developed for the offsite sector. A fabric first approach relies on early engagement with offsite modular manufacturers to make buildings safer from the outset. Working closely with partners, CPG Offsite Solutions offer a range of passive fire protection products for both service penetrations, and inter-module junctions. Penetration Seals: Penetration seals are passive fire protection systems used to maintain the fire resistance of a wall or floor that has services passing through it. In the event of a fire, the penetrations caused by these services can undermine the integrity of a buildings fire safety precautions. Service penetration seals such as Nullifire’s FP220 Service Sleeve, or Nullifire FP170 Intucollar Intumescent Pipe Collar provide an effective solution to this problem. FP220 Service Sleeve is a pipe closer device which comprises of an intumescent material within a stainless-steel shell. Expanding when exposed to fire, this device reinstates the fire performance of compartment walls which have been penetrated by combustible pipes. Suitable for installation prior to a module being transported to site, FP220 provides up to two hours fire resistance (tested to EN 1366-3) and is ultra-slim in design ensuring quick and easy installation. FP170 Intucollar Intumescent Pipe Sleeve is another penetration seal which is suitable for offsite construction. Expanding when exposed to fire, this product has been tested with a wide range of combustible pipes, insulated non-combustible pipes and network cable bundles (up to 125mm). This product is easy to install within modules and provides up to 4 hours fire resistance (tested to EN 1366-3). Module Junctions: Offsite manufacturing inherently creates joints between modules or panels. Ensuring that adequate fire protection is installed within these areas is critical to the fire strategy of the building. CPG Offsite Solutions offer a range of tested and certified passive fire protection products for module junctions, including, Nullifire FJ203 Fire Resistant Rope, as well as Nullifire FJ400 Intuspan Intumescent Joint Filler. FJ203 Fire Resistant Rope has been designed to reinstate the fire compartment requirement in linear gaps such as those created by module or panel junctions and is tested to EN 1366-4 achieving up to four hours fire resistance. Nullifire FO142 or FO143 Silicate Adhesive may be required for installation. Nullifire’s fire resistant rope is easy to apply, easy to cut and can accommodate joint widths of up to 150 mm. Saving time and money within offsite construction. FJ400 Intuspan Intumescent Joint Filler, is also a popular choice for module junction protection. Typically offering 60% physical movement capabilities, this product has been tested in linear joints from 12 mm to 115 mm gap width and is suitable for use between horizontal and vertical elements. Offering up to two hours of fire protection between module junctions, this fully dry system is ideal for high vibration areas and can be installed by hand. How can CPG Offsite Solutions support the offsite market: CPG Offsite Solutions have access to a comprehensive range of tested solutions ideal for the offsite market. Supported by an expert technical team, working closely with their partners to ensure that the correct fire protection solutions are installed within all projects. Find out more about CPG Offsite Solutions today. Building, Design & Construction Magazine | The Choice of Industry Professionals
By Patricia Gabriel – Market Manager CPG UK Nullifire has developed a high-performance fire protection solution to meet the unique requirements of off-site construction. Nullifire FZ100 Fire Safe Zone has been engineered to provide best-in-class fire-stopping capabilities to existing and future service penetrations. Quick and easy to install, as well as lightweight and easy to cut, it offers a fully tested system to BS EN 1366-3, up to EI120, delivering Nullifire’s renowed safety performance whilst supporting the fast-track nature of off-site projects. Typically installed at the drywall construction phase, one side of the partition may be fully constructed before application, and FZ100 is able to protect many bespoke off-site penetrations along with standard service requirements. FZ100 identification tape pinpoints the Fire Safe Zone, and within that perimeter, service requirements are marked out and installed with ease. For a fully optimised system from a single source, a cold smoke seal – which is required on both sides of the parition – can be achieved using Nullifire FS702. Paul Wright, National Sales Manager for CPG Offsite Solutions (UK) , said, “Nullifire FZ100 has been optimised to meet the specific needs of modular construction, delivering fire protection for off-site construction, which offers reassurance and peace of mind, as well as delivering time and cost benefits to projects overall.” “The system enables the simple installation of services, does not detract from the acoustic capabilities of the partition, is very low odour and being fully breathable foes not absorb mositure.” “Its high technology formulation is fibre free too, enabling it to be used in clean areas such as hospitals and food preparation areas.” Part of the Construction products Group (CPG UK) portfolio of brands, and previously available in the UK under the Firetherm name, Nullifire products are used extensively across built environments, with the benefit of highly knowledgable technical support and service, to ensure the ultimate peace of mind in the specification process. Paul Wright added, “FZ100 is backed up with the support of Nullifire’s renowed technical department, who understand the building regulations for off-site construction and work closely with designers, main contractors and contractors to ensure safety and performance comes as standard.” “There is assurance and support across the supply chain too. Due to in-house manufacturing all products from Nullifire undergo careful quaility management, are subject to rigourous testing methods and are developed in line with the markets requirements.” “Our focus is to protect people and buildings from fire” Nullifire understands the need to have confidence in the fire protection installed in modern buildings and our systems perform when they are called upon. We focus on making it simple for our customers to choose and install the optimum solution for every project.” Everything is focused on providing what our customers need at every stage of their project – smart protection. Contact Nullfire today for more information. Building, Design & Construction Magazine | The Choice of Industry Professionals
Leading contactor, GRAHAM, has invested in enhanced fire awareness training for more than 100 of its employees in partnership with Nullifire, a fire stopping solutions and intumescent coatings manufacturer, part of parent brand CPG UK Ltd. Designed and managed by Area Sales Manager for Fire Protection at CPG UK, Colin Green, the in-depth training has been developed specifically for GRAHAM to upskill its team with fire prevention and protection information to use in day-to-day activity. Team members from all levels of the business, including directors, quantity surveyors, site managers and planners, have now completed the training which was facilitated both in an office and on-site environment for maximum value. Participants have been actively involved in sessions to help develop an understanding of each other’s priorities and experiences, improving everyone’s awareness of fire risks across different disciplines and on-site environments. Andrzej Suwik, who leads the Quality team at GRAHAM Building North division, said: “The devastating impact of fire has been brought to a head over the last five years following the tragic incident at Grenfell Tower and subsequent legislation changes. “We want to ensure that our employees are confident in understanding the preventative measures that can be put in place across the business at all levels to mitigate any serious issues caused by fire. GRAHAM has significantly invested in the roll-out of Nullifire training which was developed specifically for our team, and we are proud to be one of the first contractors to deliver such high-level support.” Colin Green, Area Sales Manager for Fire Protection at CPG UK, said: “Working with the GRAHAM team has been a valuable experience, both to help improve its team’s knowledge but also for me to learn more about specific risks within the construction sector. Nullifire developed a bespoke package that ensured we provided practical advice that was relatable to real-life situations. “Our training is centred around raising awareness and encouraging businesses to think of fire stopping earlier subsequently allowing better solutions, improving time and money efficiency, and saving lives.” Building, Design & Construction Magazine | The Choice of Industry Professionals
